Fabrication Workflow
Magnetic drills bring a guided spindle directly to large or installed steel. They support connection holes, plate work, frames, maintenance and site modification.
Get a QuoteAPPLICATION SOLUTION
Magnetic Drills for Steel Fabrication
Plan magnetic drilling for beams, plate, frames and workshop production with the correct capacity, cutter system and inspection process.
Model Selection
Define material, diameter, depth, holes per shift, orientation and clearance. General fabrication often uses professional 40–50 mm machines; larger work requires additional capacity and torque.
Tooling and Quality
Match annular cutter, pilot pin, arbor, speed and lubrication. A controlled sample test should record all operating conditions.
BUYER QUESTIONS
magnetic drill for steel fabrication FAQ
Can a magnetic drill work on I-beams?+
Yes, when a flat steel area fully supports the magnetic base.
Which capacity is most common?+
Many general jobs fall within 40–50 mm, but selection must use the buyer’s regular hole range.
Can it be used on painted steel?+
Coatings can reduce adhesion and must be evaluated.
FERROVANTA B2B SUPPORT
Discuss Your Fabrication Application
Send the application, hole range, voltage, destination and quantity for a practical response.